Today we’re going expain howrepair washinh machine. It’s a really easy job. All we are going to need is a Phillips screw driver and a 5/16th nut driver. Let me show you how we do it. Now before we begin this repair, the first thing we should do is disconnect the power to thewasher. Simple pull the plug from the receptacle. Now the first step in this repair will be to remove the front panel. There are two Phillips screws, about an inch in from either side just under that lip. So either with a stubby Phillips screw driver or pull the machine forward enough so that you can tilt it back and remove those two screws. Once we’ve removed the two screws, we’ll pull the front panel out at the bottom and tilt it down to disconnect the two spring clips at the top. Now we can set that aside.